AT3 family of modules provides a comprehensive solution to building a wireless sensor network consisting of nodes from simple sensors to complex hubs. A common pin-out and 20 x 20mm footprint enables easy network development, upgrade, migration and maintenance.
SensRcore, an easy-to-use design platform to build wireless sensors, is equipped in most of AT3 modules. Many other enhanced ANT features are introduced through AT3 modules such as scanning channel, low priority search, channel ID list, channel transmission power control, using serial number in channel set up etc.
Features
- 2.4GHz ISM band
- 20mm x 20mm footprint
- SensRcore™ wireless sensor development platform
- Ultra-low-power operation
- Simple sync/async serial interface
- Integrated F antenna
- Up to 1/4/8 ANT channels
- Broadcast, acknowledged, or burst data transmissions
- 8 byte data payload per message
- Minimum message rate per ANT channel 0.5Hz
- ANT channel combined message rate up to 180Hz
- Burst transfer rate up to 20Kbps (true data throughput)
- 1 Mbps RF data rate
- Up to 3 public, managed and/or private ANT networks
- 125 selectable RF channels
- 1.8V to 3.6V supply voltage range
- -40°C to +85°C operating temperature
- FCC test ready
- RoHS complaint
Selection Table
Four standard AT3 modules are delivered on one common hardware platform:
|
Product |
Description |
Size |
Status |
|
ANT11TS33M4IB |
8 ANT Channels; sensRcore; 8 data channels; surface mountable |
20mm x 20mm |
Active |
|
ANT11TS33M5IB |
8 ANT Channels; sensRcore; 8 data channels; connector |
20mm x 20mm |
Active |
|
ANT11TS53M4IB |
4 ANT Channels; sensRcore; 6 data channels; surface mountable; MOQ |
20mm x 20mm |
Active |
|
ANT11TS63M4IB |
1 ANT Channel; sensRcore; 4 data channels; surface mountable; MOQ 1k |
20mm x 20mm |
Active |
|
ANT11TR13M4IB |
8 ANT Channels; surface mountable; MOQ 1k |
20mm x 20mm |
Active |
Status Definition:
ACTIVE - Product is in production and recommended for new designs.
PREVIEW - Product is not in production. Samples may or may not be available.
NRND - Product is Not recommended for new designs, but is in production to support existing customers.
EOL - Product is end-of-life. A lifetime-buy period is in effect.
Some AT3 modules requires minimum order quantity of 1k. Since all AT3 modules are pin compatible, we suggest using ANT11TS33M4/5IB module for design and prototyping.
Documents and Resources
ANT AT3 Module Datasheet
ANT SensRcore Messaging and Usage
ANT Message Protocol and Usage
Interfacing with ANT General Purpose Chipsets and Modules
Power Consumption Estimator
Ordering Information