Welcome Guest,Register Now
Log In

ANT Forum

Welcome guest, please Login or Register

You are here: Forum Home → ANT Developer’s Forums → ANTWareII → Thread

   

Battery board problem~

RankRankRankRank

Total Posts: 523

Joined 2012-11-15

PM

I Have a ANTDKT3 Kit,and read the "User manual Development Kit ".

First,I follow the "User manual Development Kit ", Two ANT11TS33M5IB can connect by ANTware II .

But...
1.I follow "User manual Development Kit " ,and use SensRware to create a script file. Then upload to NVM of ANT11TS33M5IB by ANTware II.

2.Another ANT11TS33M5IB be use by USB interface board(PC), then open ANTware II to connect with ANT11TS33M5IB(with I/O interface board & battery board )... !!! It can't recevice the data (I press the button in I/O interface board ) in ANTware II.

Battery board(ANT11TS33M5IB) ---X----->ANTware II.(ANT11TS33M5IB )

I had followed the "User manual Development Kit " to do(step by step to do!).

Who can tell me the reason or any suggestion??      
Avatar
RankRankRankRank

Total Posts: 662

Joined 2012-10-09

PM

Please double check the settings of the DIP switch on the battery board. You may also want to double check the script, along with the channel parameters configured in ANTwareII, as described in the manual.