Home
ANT Forum

ANT Forum

Username		Password		Remember Me?	forgot password?

You are here: Forum Home → ANT Developer’s Forums → ANT General Questions → Thread

20 October 2019 08:36 AM

fhfs Newbie

Total Posts: 10

Joined 2018-08-14

Hi all,

We have multiple masters in the same area, which use identical settings to open a channel.
Currently a slave, when it opens a channel, connects to one or the other.
However when the slave opens two channels, it only connects to one master.

Is it possible to connect to both masters?

23 October 2019 08:39 AM #1

haighi Administrator

Total Posts: 370

Joined 2012-06-27

For multiple masters to be distinguishable they must set the device number to a different value. Device type being the same is how you indicate they are the same type of device. Note that device number can be extended in the transmission type bit field to a total of 20 bits.

Ian

Signature

Ian Haigh

23 October 2019 09:06 AM #2

haighi Administrator

Total Posts: 370

Joined 2012-06-27

If you have multiple master channels established by the same device, they should be different device types, but with the same device number.

Ian

Signature

Ian Haigh

28 October 2019 10:15 AM #3

fhfs Newbie

Total Posts: 10

Joined 2018-08-14

Thank you for your response, I will assign a DeviceNumber to the Master Channel, and look for a wildcard on the Slave side and post my findings.

1 of 1 Pages

ANT Forum

connecting to multiple masters with same channel settings

Signature

Signature