ANT Forum

Hi,

I'm trying to execute AN06. I already read the User Manual Development Kit and I already executed all included tutorials.

From AN06. I configured the slave node with the attached script that is a copy of table 1. I also configured the master node with ANTware (see the attached picture that show the configuration).

Within the ANTware display, I observed that the master node does not send the right data as shown in figure 1. Therefore, I did not get the expected result.

I seek a lot the wrong parameter but I could not find it. Is there somebody to help to find what is wrong with configuration?

Regards,
Simon [file name=AN06-f9c87b1598c990771f5516f89794c4fd.txt size=801]http://www.thisisant.com/images/fbfiles/files/AN06-f9c87b1598c990771f5516f89794c4fd.txt[/file] [img size=706]http://www.thisisant.com/images/fbfiles/images/ANTwareII_AN06.png[/img]      

In order for the shared slave to be able to respond, it needs to receive a message from the shared master with the shared address matching its own. You will need to manually configure the payload sent from ANTware using the Set Broadcast button on the bottom right so that the first two bytes are [01][00], matching the shared address of the device configured with the script.      

Thank you, that resolved my problem.