Home
ANT Forum

ANT Forum

Username		Password		Remember Me?	forgot password?

You are here: Forum Home → ANT Developer’s Forums → ANT General Questions → Thread

22 April 2020 12:05 PM

jlst Newbie

Total Posts: 5

Joined 2020-04-14

Hi,
Using a Heart Rate sensor and a USB Stick Ant+, I can see data messages (decoded and raw) in SimulAnt+, in AntSimulatorExample project and in DEMO_HR_RECEIVER.exe (from ANT-SDK_PC.3.5)
For instance: Chan ID(33214/120/1) - Rx:(0): [02],[0d],[38],[29],[d6],[4e],[71],[3f],
but I cannot see them when launching ANT_NetDll_Demo.exe.
If I choose Device 0 Only slave, this is what I receive:

Device 0 Connected
Device: STARTUP_MESG_0x6F
::6f, 20
Device: ASSIGN_CHANNEL_0x42, Ch:0
::40, 00-42-00
Device: CHANNEL_ID_0x51, Ch:0
::40, 00-51-00
Device: CHANNEL_MESG_PERIOD_0x43, Ch:0
::40, 00-43-00
Device: OPEN_CHANNEL_0x4B, Ch:0
::40, 00-4B-00 

And if Master selected:

Device 0 Connected
Device: STARTUP_MESG_0x6F
::6f, 20
Device: ASSIGN_CHANNEL_0x42, Ch:0
::40, 00-42-00
Device: CHANNEL_ID_0x51, Ch:0
::40, 00-51-00
Device: CHANNEL_MESG_PERIOD_0x43, Ch:0
::40, 00-43-00
Device: OPEN_CHANNEL_0x4B, Ch:0
::40, 00-4B-00
Channel: EVENT_TX_0x03
  :: 40, 00-01-03
Channel: EVENT_TX_0x03
  :: 40, 00-01-03
... 

¿Cannot see raw data in ANT_NetDll_Demo.exe?
Thank you.

28 April 2020 11:23 AM #1

haighi Administrator

Total Posts: 370

Joined 2012-06-27

ANT_NetDLL_Demo.exe does not open a channel with the correct parameters to connect to a heart rate monitor.

Signature

Ian Haigh

1 of 1 Pages

ANT Forum

ANT_NetDll_Demo.exe question

Signature