Dear Sir,
We are using ANTAP2DK1 for evaluation.
I tried to configure one ANT11TS33M5IB using script to operate with 2 ANT Channels :
ANT CH0 : master, device type 1, sending temperature at 100Hz
ANT CH1 : master, device type 2, sending digital I/O at 64Hz
The following is my script :
C [93][00][47][01]
C [91][00][00][41][FE][01][00]
C [94][00][00][F8][01][01][00][00]
C [42][00][10][00]
C [51][00][31][00][01][05]
C [43][00][47][01]
C [45][00][42]
C [60][00][03]
C [4B][00]
C [91][01][01][40][FF][01][00]
C [42][01][10][00]
C [51][01][32][00][02][05]
C [43][01][00][02]
C [4B][01]
I connected another ANTAP281M5IB module as receiver to PC. I found that it can only receive the temperature through a device type 1, but cannot connect anything using device type 2.
Is there anything I missed?
