ANT Forum

Hello
I am making a bicycle computer and have the following issues

Scenario:

1. Both ANT+and Shimano Di2 dual networks act as slave devices to receive information

2. Different channels and networks for ANT+and Shimano Di2 devices

3. Other setting parameters, similar to the ANT PLUS HRM routine, match different profiles

Question:

1. Different network device channels are open, and Shimano Di2 cannot receive data. Only the ANT+channel receives data, then the DI2 channel can receives data. Once Di2 can receive data, the presence or absence of data in the ANT+channel does not affect the data reception of DI2. It seems that the start of DI2 receiving data requires the triggering of an ANT+event

2. There are many error events when dual networks receive data, such as EVENT_ RX_ FAIL, EVENT_ CHANNEL_ COLLISION. In this situation, I suspect that a lot of data will be lost



I am also puzzled by the above questions. How to set up dual networks and what are the precautions?

Thanks!      

ruidong.lu ruidong.lu - 29 January 2024 09:39 PM

Hello
I am making a bicycle computer and have the following issues

Scenario:

1. Both ANT+and Shimano Di2 dual networks act as slave devices to receive information

2. Different channels and networks for ANT+and Shimano Di2 devices

3. Other setting parameters, similar to the ANT PLUS HRM routine, match different profiles

Question:

1. Different network device channels are open, and Shimano Di2 cannot receive data. Only the ANT+channel receives data, then the DI2 channel can receives data. Once Di2 can receive data, the presence or absence of data in the ANT+channel does not affect suika game the data reception of DI2. It seems that the start of DI2 receiving data requires the triggering of an ANT+event

2. There are many error events when dual networks receive data, such as EVENT_ RX_ FAIL, EVENT_ CHANNEL_ COLLISION. In this situation, I suspect that a lot of data will be lost



I am also puzzled by the above questions. How to set up dual networks and what are the precautions?

Thanks!

Thx for your enthusiasm.      

ruidong.lu ruidong.lu - 29 January 2024 09:39 PM

Hello
I am making a bicycle computer and have the following issues

Scenario:

1. Both ANT+and Shimano Di2 dual networks act as slave devices to receive information

2. Different channels and networks for ANT+and Shimano Di2 devices gorilla tag

3. Other setting parameters, similar to the ANT PLUS HRM routine, match different profiles

Question:

1. Different network device channels are open, and Shimano Di2 cannot receive data. Only the ANT+channel receives data, then the DI2 channel can receives data. Once Di2 can receive data, the presence or absence of data in the ANT+channel does not affect the data reception of DI2. It seems that the start of DI2 receiving data requires the triggering of an ANT+event

2. There are many error events when dual networks receive data, such as EVENT_ RX_ FAIL, EVENT_ CHANNEL_ COLLISION. In this situation, I suspect that a lot of data will be lost



I am also puzzled by the above questions. How to set up dual networks and what are the precautions?

Thanks!

It is fascinating to learn about the problems you are experiencing with your bicycle computer and dual networks (ANT+ and Shimano Di2).      

ruidong.lu ruidong.lu - 29 January 2024 09:39 PM

Hello
I am making a bicycle computer and have the following issues

Scenario:

1. Both ANT+and Shimano Di2 dual networks act as slave devices to receive information

2. Different channels and networks for ANT+and Shimano Di2 devices

3. Other setting parameters, similar to the ANT PLUS HRM routine, match different profiles

Question:

1. Different network device channels are open, and Shimano Di2 cannot receive data. Only the ANT+channel receives data, then the DI2 channel can receives data. Once Di2 can receive data, the presence or absence of data in the ANT+channel does not affect the data reception of DI2. It seems that the start of DI2 receiving data requires the triggering of an ANT+event

2. There are many error events when dual networks receive data, such as EVENT_ RX_ FAIL, EVENT_ CHANNEL_ COLLISION. In this situation, I suspect that a lot of data will be lost

https://www.thisisant.com/forum/view/viewbasketball starsthread/7707


I am also puzzled by the above questions. How to set up dual networks and what are the precautions?

Thanks!

You have provided some interesting background on the issues you're having with your bike computer and dual networks (ANT+ and Shimano Di2).