I am also trying to get this going, but ANTware is not picking up any transmissions and etc.
I have a microcontroller with ANT AP2. Currently ANTware picks up transmissions from the device.
I am using these settings:
//Establishing a Channel (Pg. 21 of ANT Message and Protocol 5.1)
//Unassign Channel, just to be sure
data[0] = 0x41; //DATA (Unassign Channel)
data[1] = 0x01; //DATA (Channel Number)
ANT_SendPacket(data, 4);
//Assign Channel (type 0x10, 0x30, or 0x50)
data[0] = 0x42; //MSG ID (Assign Channel)
data[1] = 0x01; //DATA (Channel Number)
data[2] = 0x20; //DATA (Channel Type)
data[3] = 0x00; //DATA (Network Number)
ANT_SendPacket(data, 4);
//Set Channel ID (Device#=1, Device type=1, Tran' type=1, Chan type = 0x10)
data[0] = 0x51; //MSG ID (Set Channel ID)
data[1] = 0x01; //DATA (Channel Number)
data[2] = 0x03; //DATA (Device Number LSB)
data[3] = 0x00; //DATA (Device Number MSB)
data[4] = 0x03; //DATA (Device Type)
data[5] = 0x03; //DATA (Transmission type)
ANT_SendPacket(data, 6);
//ANT_SendPacket(data, 5);
//Set Channel PERIOD
data[0] = 0x43; //MSG ID (Set Channel ID)
data[1] = 0x01; //DATA (Channel Number)
data[3] = 0x40; //DATA (Channel Period LSB)
data[2] = 0x00; //DATA (Channel Period MSB)
ANT_SendPacket(data, 4);
//Open Channel
data[0] = 0x4B; //MSG ID (Open Channel)
data[1] = 0x01; //DATA (Channel = 1)
ANT_SendPacket(data, 2);
I am using the sample app described above, and I have tried to reconfigure it for myself:
// The device type and transmission type to be part of the channel ID message
private static final int CHANNEL_PROOF_DEVICE_TYPE = 0x03;
private static final int CHANNEL_PROOF_TRANSMISSION_TYPE = 3;
// The period and frequency values the channel will be configured to
private static final int CHANNEL_PROOF_PERIOD = 16384; // 2 Hz
private static final int CHANNEL_PROOF_FREQUENCY = 66;
I should note that I am trying to configure a shared channel with the phone as my master.
