ANT Forum

I am using D52 ANT Soc Module series Starter kit to test the ANT applications. I have problems to write back the ant network processor after I tested some sample programs. I have down load the ANT_Network_Processor_Source_Code_151b71c0f9 from ANT website, built it and load to the board with SD212.
But the ANTWARE_II does not detect the D52 module on the USB adapter. Is there anything I need to do when I built the Source Code? Thanks.      

Foud the problem. Must built against nRF5x-MDK-Pack 8.5 and working with SD ANT_s212_nrf52_1.0.2.

It works.      

Great.
Yes it is important that the Pack version, SDK version and SD version are all are compatible.      

I'm getting bitten by this as well. The earliest version of the S212 SoftDevice that I'm finding is 2.0.1, and it seems like this is a problem? Would just like to get back to the original configuration of the D52 Starter Kit / Network Processor to do some RSSi measurements.

I checked, and the 8.5.0 Pack is selected when I'm building.

Thanks!
-Tim      

Hi Tim,

You should be able to find the link for V1.0.2 here.      

Hi Harrison,

I'm trying to download network processor source code from here: https://www.thisisant.com/resources/network-processor-source-code/

But I get rejected: "Sorry, you don't have access to view this file"

Can you help?

Thanks,      

Hi,

It looks like you need to upgrade to an ANT+ Adopter account. You can find a link to request that here.