Home
ANT Forum

ANT Forum

Username		Password		Remember Me?	forgot password?

You are here: Forum Home → ANT Developer’s Forums → ANT General Questions → Thread

14 January 2020 08:53 AM

SajjadAhmad Newbie

Total Posts: 11

Joined 2019-08-07

I am trying to connect Wahoo Cadence Sensor with my application.
but it is always that I have to restart the application.

Means, when I started the application first time. I can see through debuging and logging the Cadence Sensor connectioned successfully.

But it dont start sending the signals even if I am pedaling.

but when I restart the application, it start sending the signals.

Can any body tell me... what it can be wrong or how I can ensure the cadence sensor will send the signals.

20 January 2020 01:22 PM #1

haighi Administrator

Total Posts: 370

Joined 2012-06-27

This sounds more likely to be a bug in your software. The sensor should require no interaction from the receiver to function properly if it complies with the profile. All that is required is for you to pedal so that the sensor can measure revolutions of the crank.

I recommend using AntwareII or SimulANT+ to observe the data from the Wahoo Cadence Sensor while your application is connected, but not displaying cadence. You can also simulate a cadence sensor using SimulANT+ for testing your application. This is what will be used to certify your software when you submit for certification.

Ian

Signature

Ian Haigh

1 of 1 Pages

ANT Forum

Cadence Signal not coming

Signature