com.dsi.ant.plugins.antplus.pcc

Interface AntPlusBikePowerPcc.IRawPowerOnlyDataReceiver

Enclosing class:

AntPlusBikePowerPcc

public static interface AntPlusBikePowerPcc.IRawPowerOnlyDataReceiver

Receiver for the RawPowerOnlyData event, which is: The basic power data calculated by the sensor itself. This data is mandatory and must be sent by all non-CTF sensors.

Method Summary

Methods

Modifier and Type	Method and Description
void	onNewRawPowerOnlyData(long estTimestamp, java.util.EnumSet<EventFlag> eventFlags, long powerOnlyUpdateEventCount, int instantaneousPower, long accumulatedPower) Receives the data from a RawPowerOnlyData event.

Method Detail

onNewRawPowerOnlyData

void onNewRawPowerOnlyData(long estTimestamp,
                         java.util.EnumSet<EventFlag> eventFlags,
                         long powerOnlyUpdateEventCount,
                         int instantaneousPower,
                         long accumulatedPower)

Receives the data from a RawPowerOnlyData event.

Parameters:

estTimestamp - The estimated timestamp of when this event was triggered. Useful for correlating multiple events and determining when data was sent for more accurate data records.

eventFlags - Informational flags about the event.

powerOnlyUpdateEventCount - This field is incremented each time the sensor updates power-only data. Can be used to help calculate power between RF outages and to determine if the data from the sensor is new. Note: If the subscriber is not the first PCC connected to the device the accumulation will probably already be at a value greater than 0 and the subscriber should save the first received value as a relative zero for itself. Rollover: Every ~9 quintillion N/A.

instantaneousPower - Instantaneous power computed by the sensor valid for display (up to 1W resolution). Units: W.

accumulatedPower - Accumulated power is the running sum of the instantaneous power data and is incremented at each update of the update event count (up to 1W resolution). Can be used to help calculate power between RF outages. Note: If the subscriber is not the first PCC connected to the device the accumulation will probably already be at a value greater than 0 and the subscriber should save the first received value as a relative zero for itself. Units: W. Rollover: Every ~9 quintillion W.