| Package | Description |
|---|---|
| com.dsi.ant.plugins.antplus.pcc | |
| com.dsi.ant.plugins.internal.compatibility |
| Class and Description |
|---|
| AntPlusBikeCadencePcc
Enables communication between a client and the BikeCadence plugin service.
|
| AntPlusBikeCadencePcc.ICalculatedCadenceReceiver
Receiver for the CalculatedCadence event, which is:
The cadence calculated from the raw values in the sensor broadcast.
|
| AntPlusBikeCadencePcc.IMotionAndCadenceDataReceiver
Receiver for the MotionAndCadenceData event, which is:
A 'stop indicator flag' to indicate whether the cadence sensor has detected that the bike has stopped.
|
| AntPlusBikeCadencePcc.IRawCadenceDataReceiver
Receiver for the RawCadenceData event, which is:
The raw event timestamp and revolution count accumulation.
|
| AntPlusBikePowerPcc
Enables communication between a client and the BikePower plugin service.
|
| AntPlusBikePowerPcc.AutoZeroStatus
The Auto-Zero status code.
|
| AntPlusBikePowerPcc.CalculatedWheelDistanceReceiver
Receiver for the CalculatedWheelDistance event, which is:
The accumulated calculated distance traveled.
|
| AntPlusBikePowerPcc.CalculatedWheelSpeedReceiver
Receiver for the CalculatedWheelSpeed event, which is:
The average speed between two received messages calculated from the best available data from the power sensor.
|
| AntPlusBikePowerPcc.CalibrationId
The calibration response code.
|
| AntPlusBikePowerPcc.CalibrationMessage
The calibration data sent by the power sensor.
|
| AntPlusBikePowerPcc.CrankLengthSetting
The crank length setting.
|
| AntPlusBikePowerPcc.CrankLengthStatus
The crank length status sent by the power meter.
|
| AntPlusBikePowerPcc.CrankParameters
The crank parameters sent by the power meter.
|
| AntPlusBikePowerPcc.CustomCalibrationStatus
If the sensor requires custom calibration.
|
| AntPlusBikePowerPcc.DataSource
The data source code.
|
| AntPlusBikePowerPcc.IAutoZeroStatusReceiver
Receiver for the AutoZeroStatus event, which is:
The updated Auto Zero status of the sensor.
|
| AntPlusBikePowerPcc.ICalculatedCrankCadenceReceiver
Receiver for the CalculatedCrankCadence event, which is:
The average cadence between two received messages calculated from the bet available data from the power sensor.
|
| AntPlusBikePowerPcc.ICalculatedPowerReceiver
Receiver for the CalculatedPower event, which is:
The average power between two received messages calculated from the best available data from the power sensor.
|
| AntPlusBikePowerPcc.ICalculatedTorqueReceiver
Receiver for the CalculatedTorque event, which is:
The average torque between two received messages calculated from the best available data from the power sensor.
|
| AntPlusBikePowerPcc.ICalibrationMessageReceiver
Receiver for the CalibrationMessage event, which is:
Response data from the power meter when calibration occurs (either by request or automatically performed by the power meter) or is confering current calibration status.
|
| AntPlusBikePowerPcc.ICrankParametersReceiver
Receiver for the CrankParameters event, which is:
The power meter returned the requested crank parameters.
|
| AntPlusBikePowerPcc.IInstantaneousCadenceReceiver
Receiver for the InstantaneousCadence event, which is:
The instantaneous cadence data.
|
| AntPlusBikePowerPcc.IMeasurementOutputDataReceiver
Receiver for the MeasurementOutputData event, which is:
Data sent by power meters intended to enrich the calibration process.
|
| AntPlusBikePowerPcc.IPedalPowerBalanceReceiver
Receiver for the PedalPowerBalance event, which is:
The pedal power data field provides the user's power contribution (as a percentage) between the left and right pedals, as measured by a pedal power sensor.
|
| AntPlusBikePowerPcc.IPedalSmoothnessReceiver
Receiver for the PedalSmoothness event, which is:
The instantaneous values of left and right, or combined, Pedal Smoothness from the sensor.
|
| AntPlusBikePowerPcc.IRawCrankTorqueDataReceiver
Receiver for the RawCrankTorqueData event, which is:
Event timing information and torque values from a power sensor that measures torque at the crank.
|
| AntPlusBikePowerPcc.IRawCtfDataReceiver
Receiver for the RawCtfData event, which is:
Event timing information and crank torque values from a power sensor reported as frequency instead.
|
| AntPlusBikePowerPcc.IRawPowerOnlyDataReceiver
Receiver for the RawPowerOnlyData event, which is:
The basic power data calculated by the sensor itself.
|
| AntPlusBikePowerPcc.IRawWheelTorqueDataReceiver
Receiver for the RawWheelTorqueData event, which is:
Event timing information and torque values from a power sensor that measures torque on the rear wheel.
|
| AntPlusBikePowerPcc.ITorqueEffectivenessReceiver
Receiver for the TorqueEffectiveness event, which is:
The instantaneous values of left and right Torque Effectiveness from the sensor.
|
| AntPlusBikePowerPcc.MeasurementDataType
The measurement data type sent by the power meter during calibration.
|
| AntPlusBikePowerPcc.SensorAvailabilityStatus
The availability of sensors for the power meter.
|
| AntPlusBikePowerPcc.SensorSoftwareMismatchStatus
The status of the sensor software on left/right sensors.
|
| AntPlusBikeSpeedDistancePcc
Enables communication between a client and the BikeSpeedDistance plugin service.
|
| AntPlusBikeSpeedDistancePcc.CalculatedAccumulatedDistanceReceiver
Receiver for the CalculatedAccumulatedDistance event, which is:
The accumulated distance calculated from the raw values in the sensor broadcast since the sensor was first connected.
|
| AntPlusBikeSpeedDistancePcc.CalculatedSpeedReceiver
Receiver for the CalculatedSpeed event, which is:
The speed calculated from the raw values in the sensor broadcast.
|
| AntPlusBikeSpeedDistancePcc.IMotionAndSpeedDataReceiver
Receiver for the MotionAndSpeedData event, which is:
A 'stop indicator flag' to indicate whether the speed sensor has detected that the bike has stopped.
|
| AntPlusBikeSpeedDistancePcc.IRawSpeedAndDistanceDataReceiver
Receiver for the RawSpeedAndDistanceData event, which is:
The raw event timestamp and revolution count accumulation.
|
| AntPlusBloodPressurePcc
Enables communication between a client and the BloodPressure plugin service.
|
| AntPlusBloodPressurePcc.BloodPressureMeasurement
Contains the data of a blood pressure FIT message.
|
| AntPlusBloodPressurePcc.DownloadMeasurementsStatusCode
Defines the status codes for the
AntPlusBloodPressurePcc.requestDownloadMeasurements(boolean, boolean, com.dsi.ant.plugins.antplus.pcc.AntPlusBloodPressurePcc.IDownloadMeasurementsStatusReceiver, com.dsi.ant.plugins.antplus.pcc.AntPlusBloodPressurePcc.IMeasurementDownloadedReceiver, com.dsi.ant.plugins.antplus.common.AntFsCommon.IAntFsProgressUpdateReceiver) request. |
| AntPlusBloodPressurePcc.IDownloadMeasurementsStatusReceiver
Receiver for the DownloadMeasurementsStatus event, which is:
Receives the status of a
#requestDownloadMeasurements(boolean, boolean, IDownloadMeasurementsStatusReceiver, IMeasurementDownloadedReceiver, IAntFsProgressUpdateReceiver) request. |
| AntPlusBloodPressurePcc.IMeasurementDownloadedReceiver
Receiver for the MeasurementDownloaded event, which is:
Receives measurements as they are downloaded by a
#requestDownloadMeasurements(boolean, boolean, IDownloadMeasurementsStatusReceiver, IMeasurementDownloadedReceiver, IAntFsProgressUpdateReceiver) request. |
| AntPlusBloodPressurePcc.IResetDataAndSetTimeFinishedReceiver
Receiver for the ResetDataAndSetTimeFinished event, which is:
Receives the result of a
AntPlusBloodPressurePcc#requestResetDataAndSetTime(boolean, IResetDataAndSetTimeFinishedReceiver, IAntFsProgressUpdateReceiver) command. |
| AntPlusEnvironmentPcc
Enables communication between a client and the Environment plugin service.
|
| AntPlusEnvironmentPcc.ITemperatureDataReceiver
Receiver for the TemperatureData event, which is:
Current temperature and 24 hour highs and lows.
|
| AntPlusFitnessEquipmentPcc
Enables communication between a client and the FitnessEquipment plugin service.
|
| AntPlusFitnessEquipmentPcc.BikeMethods
Subscriptions and commands for bikes.
|
| AntPlusFitnessEquipmentPcc.CalculatedTrainerDistanceReceiver
Receiver for the CalculatedTrainerDistance event, which is:
The accumulated calculated distance traveled.
|
| AntPlusFitnessEquipmentPcc.CalculatedTrainerSpeedReceiver
Receiver for the CalculatedTrainerSpeed event, which is:
The average speed between two received messages calculated from the best available data from the trainer.
|
| AntPlusFitnessEquipmentPcc.CalibrationInProgress
Sent from the fitness equipment while a calibration is being performed.
|
| AntPlusFitnessEquipmentPcc.CalibrationInProgress.SpeedCondition
Indicates whether the speed conditions for successful calibration are currently met by the fitness equipment.
|
| AntPlusFitnessEquipmentPcc.CalibrationInProgress.TemperatureCondition
Indicates whether the temperature conditions for successful calibration are currently met by the fitness equipment.
|
| AntPlusFitnessEquipmentPcc.CalibrationResponse
Response from the fitness equipment after it completes calibration.
|
| AntPlusFitnessEquipmentPcc.Capabilities
Manufacturer-set capabilities data from the fitness equipment.
|
| AntPlusFitnessEquipmentPcc.ClimberMethods
Subscriptions and commands for climbers.
|
| AntPlusFitnessEquipmentPcc.CommandStatus
Confirms the status of commands sent from an open display to the fitness equipment.
|
| AntPlusFitnessEquipmentPcc.CommandStatus.CommandId
The command ID sent to the fitness equipment.
|
| AntPlusFitnessEquipmentPcc.CommandStatus.Status
The command status of the last received command by the fitness equipment.
|
| AntPlusFitnessEquipmentPcc.EllipticalMethods
Subscriptions and commands for ellipticals.
|
| AntPlusFitnessEquipmentPcc.EquipmentState
Defines Equipment State Codes
|
| AntPlusFitnessEquipmentPcc.EquipmentType
Defines the Equipment Type Codes
|
| AntPlusFitnessEquipmentPcc.HeartRateDataSource
Defines Heart Rate Data Source Codes
|
| AntPlusFitnessEquipmentPcc.IBasicResistanceReceiver
Receiver for the BasicResistance event, which is:
The basic resistance mode settings data.
|
| AntPlusFitnessEquipmentPcc.IBikeDataReceiver
Receiver for the BikeData event, which is:
The data specific to bikes.
|
| AntPlusFitnessEquipmentPcc.ICalculatedTrainerPowerReceiver
Receiver for the CalculatedTrainerPower event, which is:
The average power between two received messages calculated from the best available data from the trainer.
|
| AntPlusFitnessEquipmentPcc.ICalibrationInProgressReceiver
Receiver for the CalibrationInProgress event, which is:
Response from the fitness equipment while it completes calibration.
|
| AntPlusFitnessEquipmentPcc.ICalibrationResponseReceiver
Receiver for the CalibrationResponse event, which is:
Response from the fitness equipment after it completes calibration.
|
| AntPlusFitnessEquipmentPcc.ICapabilitiesReceiver
Receiver for the Capabilities event, which is:
Manufacturer-set capabilities data from the fitness equipment.
|
| AntPlusFitnessEquipmentPcc.IClimberDataReceiver
Receiver for the ClimberData event, which is:
The data specific to climbers.
|
| AntPlusFitnessEquipmentPcc.ICommandStatusReceiver
Receiver for the CommandStatus event, which is:
Confirms the status of commands sent from an open display to the fitness equipment.
|
| AntPlusFitnessEquipmentPcc.IEllipticalDataReceiver
Receiver for the EllipticalData event, which is:
The data specific to ellipticals.
|
| AntPlusFitnessEquipmentPcc.IFitnessEquipmentStateReceiver
Receiver for the FitnessEquipmentState event, which is:
The current type and state of the fitness equipment.
|
| AntPlusFitnessEquipmentPcc.IGeneralFitnessEquipmentDataReceiver
Receiver for the GeneralFitnessEquipmentData event, which is:
The general information required to be sent by the fitness equipment.
|
| AntPlusFitnessEquipmentPcc.IGeneralMetabolicDataReceiver
Receiver for the GeneralMetabolicData event, which is:
The metabolic data for the user.
|
| AntPlusFitnessEquipmentPcc.IGeneralSettingsReceiver
Receiver for the GeneralSettings event, which is:
The general settings data.
|
| AntPlusFitnessEquipmentPcc.ILapOccuredReceiver
Receiver for the LapOccured event, which is:
This event is fired when the fitness equipment determines a lap has been finished by the user.
|
| AntPlusFitnessEquipmentPcc.INordicSkierDataReceiver
Receiver for the NordicSkierData event, which is:
The data specific to nordic skiers.
|
| AntPlusFitnessEquipmentPcc.IRawTrainerDataReceiver
Receiver for the RawTrainerData event, which is:
The basic power and cadence data calculated by the trainer itself.
|
| AntPlusFitnessEquipmentPcc.IRawTrainerTorqueDataReceiver
Receiver for the RawTrainerTorqueData event, which is:
Event timing information and torque values from a trainer that measures torque on the rear wheel.
|
| AntPlusFitnessEquipmentPcc.IRowerDataReceiver
Receiver for the RowerData event, which is:
The data specific to bikes.
|
| AntPlusFitnessEquipmentPcc.ITargetPowerReceiver
Receiver for the TargetPower event, which is:
The target power mode settings data.
|
| AntPlusFitnessEquipmentPcc.ITrackResistanceReceiver
Receiver for the TrackResistance event, which is:
The track resistance mode settings data.
|
| AntPlusFitnessEquipmentPcc.ITrainerStatusReceiver
Receiver for the TrainerStatus event, which is:
Indicates whether the trainer requires calibration and/or configuration data to be sent, and whether the target power range can be attained based on the current cycling speed.
|
| AntPlusFitnessEquipmentPcc.ITreadmillDataReceiver
Receiver for the TreadmillData event, which is:
The data specific to treadmills.
|
| AntPlusFitnessEquipmentPcc.IUserConfigurationReceiver
Receiver for the UserConfiguration event, which is:
The user configuration page transmits user-entered data from the open display to the fitness equipment.
|
| AntPlusFitnessEquipmentPcc.IWindResistanceReceiver
Receiver for the WindResistance event, which is:
The wind resistance mode settings data.
|
| AntPlusFitnessEquipmentPcc.NordicSkierMethods
Subscriptions and commands for nordic skiers.
|
| AntPlusFitnessEquipmentPcc.RowerMethods
Subscriptions and commands for rowers.
|
| AntPlusFitnessEquipmentPcc.Settings
Provides information about the user and previously paired sensors.
|
| AntPlusFitnessEquipmentPcc.Settings.Gender
Gender
|
| AntPlusFitnessEquipmentPcc.TrainerDataSource
The data source code.
|
| AntPlusFitnessEquipmentPcc.TrainerMethods
Subscriptions and commands for trainers.
|
| AntPlusFitnessEquipmentPcc.TrainerStatusFlag
Status flag from trainers which indicate possible required user intervention.
|
| AntPlusFitnessEquipmentPcc.TreadmillMethods
Subscriptions and commands for treadmills.
|
| AntPlusFitnessEquipmentPcc.UserConfiguration
The user configuration page transmits user-entered data from the open display to the fitness equipment.
|
| AntPlusGeocachePcc
Enables communication between a client and the Geocache plugin service.
|
| AntPlusGeocachePcc.DeviceChangingCode
Defines the codes explaining the changes occurring to the device list received by
the
AntPlusGeocachePcc.IAvailableDeviceListReceiver. |
| AntPlusGeocachePcc.GeocacheDeviceData
Represents the data contained on a Geocache device.
|
| AntPlusGeocachePcc.GeocacheRequestStatus
Defines the status code results sent on the result receiver for requests to the plugin.
|
| AntPlusGeocachePcc.IAuthTokenRequestFinishedReceiver
Receiver for the AuthTokenRequestFinished event, which is:
Receives the result of a finished authentication token request.
|
| AntPlusGeocachePcc.IAvailableDeviceListReceiver
Receiver for the AvailableDeviceList event, which is:
Broadcasts the current list of devices available to connect to along with information identifying any change since the last update, if applicable.
|
| AntPlusGeocachePcc.IDataDownloadFinishedReceiver
Receiver for the DataDownloadFinished event, which is:
Receives the result of a finished data download.
|
| AntPlusGeocachePcc.IProgrammingFinishedReceiver
Receiver for the ProgrammingFinished event, which is:
Receives the result of a finished programming task.
|
| AntPlusGeocachePcc.ISimpleProgressUpdateReceiver
Receiver for the SimpleProgressUpdate event, which is:
Communicates the work done.
|
| AntPlusGeocachePcc.ProgrammableGeocacheDeviceData
Represents the programmable data contained on a geocache device.
|
| AntPlusHeartRatePcc
Enables communication between a client and the HeartRate plugin service.
|
| AntPlusHeartRatePcc.DataState
Describes the state of the data received
|
| AntPlusHeartRatePcc.ICalculatedRrIntervalReceiver
Receiver for the RrInterval event, which is:
Heart beat timing data calculated by the plugin.
|
| AntPlusHeartRatePcc.IHeartRateDataReceiver
Receiver for the HeartRateData event, which is:
The heart rate data broadcast by every ANT+ heart rate sensor.
|
| AntPlusHeartRatePcc.IPage4AddtDataReceiver
Receiver for the Page4AddtData event, which is:
The additional data sent on page 4.
|
| AntPlusHeartRatePcc.RrFlag
Describes how the RR Interval was calculated, and which source the data was derived from.
|
| AntPlusStrideSdmPcc
Enables communication between a client and the StrideSdm plugin service.
|
| AntPlusStrideSdmPcc.ICalorieDataReceiver
Receiver for the CalorieData event, which is:
The total calories consumed over the session.
|
| AntPlusStrideSdmPcc.IComputationTimestampReceiver
Receiver for the ComputationTimestamp event, which is:
Data about the timing of the last speed and distance computation.
|
| AntPlusStrideSdmPcc.IDataLatencyReceiver
Receiver for the DataLatency event, which is:
The sensor reported latency between calculation and sensor transmission.
|
| AntPlusStrideSdmPcc.IDistanceReceiver
Receiver for the Distance event, which is:
The total distance travelled since the plugin connected to this device.
|
| AntPlusStrideSdmPcc.IInstantaneousCadenceReceiver
Receiver for the InstantaneousCadence event, which is:
The instantaneous cadence data.
|
| AntPlusStrideSdmPcc.IInstantaneousSpeedReceiver
Receiver for the InstantaneousSpeed event, which is:
The instantaneous speed data.
|
| AntPlusStrideSdmPcc.ISensorStatusReceiver
Receiver for the SensorStatus event, which is:
Various status information about the sensor.
|
| AntPlusStrideSdmPcc.IStrideCountReceiver
Receiver for the StrideCount event, which is:
The cumulative stride count since the plugin connected to this device.
|
| AntPlusStrideSdmPcc.SensorHealth
Reported health of sensor.
|
| AntPlusStrideSdmPcc.SensorLocation
Reported location of sensor.
|
| AntPlusStrideSdmPcc.SensorUseState
Reported state of use of sensor
|
| AntPlusWatchDownloaderPcc
Enables communication between a client and the WatchDownloader plugin service.
|
| AntPlusWatchDownloaderPcc.DeviceInfo
Device information, used in available devices list and making requests
|
| AntPlusWatchDownloaderPcc.DeviceListUpdateCode
Defines the codes explaining the changes occurring to the device list received by
the
AntPlusWatchDownloaderPcc.IAvailableDeviceListReceiver. |
| AntPlusWatchDownloaderPcc.IAvailableDeviceListReceiver
Receiver for the AvailableDeviceList event, which is:
Broadcasts the current list of devices available to connect to along with information identifying any change since the last update, if applicable.
|
| AntPlusWatchDownloaderPcc.IDownloadActivitiesFinishedReceiver
Receiver for the download activity commands.
|
| AntPlusWeightScalePcc
Enables communication between a client and the WeightScale plugin service.
|
| AntPlusWeightScalePcc.AdvancedMeasurement
Represents the data contained in an advanced measurement from a scale
|
| AntPlusWeightScalePcc.BodyWeightStatus
The status of the body weight value.
|
| AntPlusWeightScalePcc.Gender
Defines codes for the gender of the user of the weight scale
|
| AntPlusWeightScalePcc.IAdvancedMeasurementFinishedReceiver
Receiver for the AdvancedMeasurementFinished event, which is:
Receives the result of an advanced measurement request.
|
| AntPlusWeightScalePcc.IBasicMeasurementFinishedReceiver
Receiver for the BasicMeasurementFinished event, which is:
Receives the result of a basic measurement request.
|
| AntPlusWeightScalePcc.IBodyWeightBroadcastReceiver
Receiver for the BodyWeightBroadcast event, which is:
The weight value currently broadcast by the weight scale.
|
| AntPlusWeightScalePcc.ICapabilitiesRequestFinishedReceiver
Receiver for the CapabilitiesRequestFinished event, which is:
Receives the result of a capabilities request.
|
| AntPlusWeightScalePcc.IDownloadAllHistoryFinishedReceiver
Receiver for the DownloadAllHistoryFinished event, which is:
Receives the result of a
#requestDownloadAllHistory(IDownloadAllHistoryFinishedReceiver, IFitFileDownloadedReceiver, IAntFsProgressUpdateReceiver) command. |
| AntPlusWeightScalePcc.UserProfile
Represents data specific to the user of the weight scale
|
| AntPlusWeightScalePcc.WeightScaleRequestStatus
Defines the status code results sent on the result receiver for requests to the plugin.
|
| MultiDeviceSearch.RssiCallback
Callback interface for the RSSI Update event
|
| MultiDeviceSearch.RssiSupport
Values representing whether rssi data is available for the current multi search.
|
| MultiDeviceSearch.SearchCallbacks
Callback interface for receiving search results and status
|
| Class and Description |
|---|
| AntPlusGeocachePcc.GeocacheDeviceData
Represents the data contained on a Geocache device.
|
| AntPlusGeocachePcc.ProgrammableGeocacheDeviceData
Represents the programmable data contained on a geocache device.
|
| AntPlusHeartRatePcc.DataState
Describes the state of the data received
|
| AntPlusHeartRatePcc.IHeartRateDataReceiver
Receiver for the HeartRateData event, which is:
The heart rate data broadcast by every ANT+ heart rate sensor.
|
Copyright © 2015 Dynastream Innovations Inc. All Rights Reserved.